Pre-assembled TEFZEL twisted pair cable according to specification M22759/32 or SAE AS22759/32.
1x twisted pair 22 AWG white/green for CAN.
1x twisted pair 22 AWG red/black for 12V and ground.
DR-25 3/16" sheathing.
This cable was developed based on our own practical experience. Often, a four-wire cable with CAN bus and power supply is needed for CAN devices that have low power consumption, e.g. keypads, displays, camera systems, etc.
This cable is made up of 2 twisted pairs, one for CAN BUS and one for power supply. The whole thing is sheathed with DR-25 3/16" heat-shrink tubing.
Easy to use:
- Cut to length
- Cut back the DR-25 approx. 3-5 cm, as required
- Crimp the plug
- If necessary, boot or ATUM/SCL over the plug
- Done
This cable offers massive time savings, especially for longer lengths. The cable is machine-manufactured for maximum quality and durability.
Cross-section: 22 AWG / 0.33 mm²
Temperature range: -65°C to 150°C
Conductor material: tinned copper
Insulation material: radiation-crosslinked modified ETFE
Nominal outer diameter: 1.06 mm
These are very high-quality cables that are used in motorsport, aviation and the military.
